就地冷再生技術的道路路面維修改造傳統方法具有無可比擬的優勢，下面冷再生機出租人員從7個方面來說明這個問題。

The traditional method of road surface maintenance and reconstruction with local cold recycling technology has incomparable advantages. The following is a description of this problem from seven aspects by the taxi staff of cold recycling machine.

1，成本低，根據海外引入的工程信息，與舊的層壓材料新的覆蓋方法相比，就地冷再生能的約20％的成本降低到46％。

1. Low cost. According to the engineering information introduced from overseas, compared with the new covering method of the old laminated material, the cost of local cold regeneration energy is reduced from about 20% to 46%.

2，提高老路的水平，我們可以提高基層的承載能力，改善道路，實現從根本上，這是低等級公路，特別是有特殊的含義。

2. To improve the level of the old road, we can improve the bearing capacity of the basic level, improve the road, and fundamentally realize that this is a low-grade highway, especially with special meaning.

3，厚度均勻的結構完整性，從而導致冷回收店內層，有有時可見之間沒有淡薄接口覆蓋傳統的施工方法。

3. The structural integrity with uniform thickness leads to the fact that there is sometimes no thin interface between the inner layer of the cold recycling shop and the traditional construction method.

4，路基無損傷，僅通過一次由于一次性冷再循環做法，在暴露的路基再生單元。與傳統的施工方法，對路基的損傷較小相比。

4. There is no damage to the subgrade, and the exposed subgrade is regenerated only once due to one-time cold recycling. Compared with the traditional construction method, the damage to the subgrade is less.

5，節約材料，所有的舊料全部簾布本地使用，從而大大降低了新材料，以保護資源量。

5. Save materials. All the old materials are used locally, which greatly reduces the new materials and protects the resources.

6，建設周期短，因為那里是老材料的任何運輸問題，舊機器和目標上沒有任何其他材料碎散，不需要專門的散裝物料拆除和破碎，更重要的是，一次性操作的特點施工過程大大簡化了施工工藝，節省了施工時間。

6. The construction period is short, because there is no transportation problem of old materials. There are no other materials scattered on the old machines and targets, and there is no need for special bulk materials to be dismantled and broken. More importantly, the construction process is greatly simplified and construction time is saved due to the characteristics of one-time operation.

7，冷再生保護環境，因為使用舊物大大降低新材料的開發，沒有運輸和堆放舊物的問題，以符合要求的根本。

7. Cold regeneration protects the environment, because the use of old materials greatly reduces the development of new materials, and there is no problem of transporting and stacking old materials, so as to meet the fundamental requirements of environmental protection.

冷再生機采用自動深度控制裝置，負荷控制裝置，使發動機的速度被保持在峰值扭矩，以維持高的產率。您有使用需求可以隨時來我們網站http://dzjshs.cn進行咨詢！

The cold regenerator adopts automatic depth control device and load control device to keep the engine speed at peak torque to maintain high productivity. You can come to our website at any time if you need to use it http://dzjshs.cn Consult!